How To Use A Shower Curtain As A Window Curtain

Grommet tiptop defunction are my get to option for window coverings for a few reasons.

First, the grommets make sliding the curtain panels open and closed really piece of cake.

Second, curtain panels are a smashing fashion to add together softness, color, or fifty-fifty pattern and texture to a space.

Only that much material has the potential to break the upkeep and really good quality grommet superlative curtains tin can also be expensive, only don't worry. I've got a hugger-mugger source for amazing cloth that will go y'all the same expect as some of the designer stores.

My secret is to use fabric shower defunction and today I'grand going to show you how to make grommet top curtains with them.

I'thou all about getting the exact look I want without breaking the banking concern and learning to run up a direct line so that I can make my own habitation decor has been the all-time matter I e'er did.

This postal service contains affiliate links for your convenience. Click here to read my total disclosure.

I originally fell in love with the look of these bold stripe curtains when I saw the Alston curtains from Crate & Barrel, just I merely couldn't swing the cost.

I definitely knew that the bold stripe was the wait I wanted so I set out to find a way to go the same look on a tighter upkeep.

It turns out that finding textile with this bold strip to brand grommet top curtains from scratch was hard to come past, simply since bold stripes are a archetype, it was pretty easy to discover cloth shower curtains in many unlike color options.

Turns out that cloth shower defunction are the perfect weight of material for curtain panels and using them also meant that many of my seams were already sewn for me! Win-Win!

How to brand grommet top curtains from material shower curtains

Grommet acme defunction function the best (slide open up and closed) and look the best (lay really nicely) if they have a lot of structure at the top and take evenly placed grommets.

Using grommet tape made getting the spacing and the structure needed for a really high end wait so stinkin' simple.

Yous volition demand:

• Grommet Tape : You lot will demand 2 yards per panel
• Grommet Rings: The number of rings needed volition depend on how many panels you are making. I used sixteen rings per panel/ shower mantle.
  • Note:  You will need to know the measurement of your drapery rod before ordering grommet rings. There are different sizes. These ones are for rods up to 1 three/8 inch, and these ones are for rods up to xiii/sixteen diameter.
• Sewing Car: This is my favorite sewing machine for home decor projects. It sews through thicker fabrics without a trouble, isn't complicated, and isn't expensive.
• Cloth Shower Defunction: Yous volition nigh likely demand ii curtains per console depending on the height of your ceiling. Double check the dimensions of the shower defunction yous purchase.
  • My favorite sources for fabric shower defunction are:
    • Target
    • Amazon
    • Overstock.com
    • Hayneedle
  • You can discover shower curtains with this assuming stripe in various colors at these online stores:
    • Pottery Barn
    • Macys.com
    • Amazon

Step 1: Cutting your shower curtains to create your curtain panels.

For a floor to ceiling console you lot will need 2 shower curtains. I used the lesser hem of 1 shower drapery as the top hem of my pall and then cut off the bottom hem near one inch beneath one of the stripes every bit far down as I could.

And then I cutting the hem off of a 2nd shower curtain about an inch above or below the stripe of the reverse colour.

Footstep two: Sew the 2 shower curtains together to go your desired length.

Sew the ii pieces together right at the edge of each stripe and so that when they hang you tin't tell that in that location is a seam and the stripes proceed seamlessly.

Stride 3: Prepare your bottom hem.

I prepared my lesser hem by folding the fabric over twice to make about a 2 ane/2 inch hem. This gives the bottom of the curtain some weight so it will hang nicely.

Step iv: Apply the grommet tape.

Using grommet tape makes this pretty much fool proof. I laid my tape out forth the back side of my pall nearly 2 inches downwards from the elevation and pinned it in place. So, following the instructions that came with the grommet record, I sewed forth the yellow lines.

Step 5: Cut the grommet holes and attach the grommet rings

Using scissors, cut out the material circles using the grommet tape every bit your guide.

In one case your circles are cutting, snap on each grommet ring.

Hang up your new grommet pinnacle defunction and give yourself a loftier five!

Another way I saved a bit of money was to cheat a trivial fleck.

See how 2 of my panels go backside the couch? Well for each of those, I just used one shower curtain!

That'southward correct! Y'all can't come across that they don't become all the manner to the floor and this actually makes them easier to shut when needed.

I can't await to see which shower curtains yous choose to make your own grommet elevation curtains!

Source: https://www.heytherehome.com/diy-grommet-top-curtains/

Posted by: carterroich1970.blogspot.com

Share this post